PRODUCT DESCRIPTION:
|
|
|
|
POWERFUL-Wattage: 110W -4000mah Battery -Single working time: 40s -20,000 Rpm Speed Motor -Type-c Fast Charging Port -6 Sharp Stainless Steel Blades |
SAFE-FDA approved -Made of food-grade materials -No 100% power consumption -Nothing inside, stopping automatically after 5s of start-up. -Stop working automatically when jar and base is separated. |
Prompt Light-Slowly flashing: charging -The lights are all on and not flashing: fully charged. -Fast Flashing: Double click to start when the bottle and base are not tightened. Or when the blender stops operating suddenly. |
Easy to CleanMethod 1: Add 80% water, double click to clean automatically. Method 2: If the stain is strong,remove the lid & Jar from the base, clean with the included brush. (Be careful not to touch the blade with your hands!) |
|
|
|
|
---|---|---|---|
Step 1:One click the button to check power status. Cut fruit into 6 inch small pieces, and demold ice cubes. (Please use the included Blue Ice Cube Tray! ) |
Step 2:Pour in the small pieces, ice cubes and liquid. Small pieces and ice cubes to liquid ratio: 20%:60%. (Not exceeding the Max line! ). |
Step 3:Make sure the blender is closed. Double click button to startup, press the lid of the drinking spout and hold blender upside down for 1-2 seconds, then turn it back and shake it gently. |
Step 4:Stops automatically after 40 seconds. Pour into the cup to drink if drink is sticky or you can drink directly through the drinking spout if drink is watery. |
Package includesPackaging Box & Portable Blender Cleaning Brush & Type-c Charging Cable Instruction Manual & Blue Silicone Ice Cube Tray |
How to use the included Blue Ice Cube Tray?1、Fill all the small compartments with water and put the ice cube tray in the refrigerator. 2、Prepare a larger plate, operate as shown, and demould the ice cubes into the plate. |
Disassembly and assembly of the blenderDisassembly: Turn the lid to the right and spin it out of the bottle. Turn the bottle to the right and spin it out of the base. Assembly: The blender can be assembled by reversing the disassembly procedure. |
Assembly of cleaning brushInsert the two small tentacles of the blue rod into the hole of the white rod |
Attention:-
- Please keep the product away from children and the mentally ill.
- Please charge at least once a month, otherwise the battery will be damaged.
- Please do not put the base into the refrigerator or water, otherwise the battery will be damaged.
- This product is exclusive for juice making, not suitable for blending hard objects such as meat, nuts or beans.
- The blender can't be disinfected by microwave or hot water above 50°C, otherwise the accessories will be deformed.
- Please do not use the steel ball, corrosivity cleanser or dishwasher to clean the blender , otherwise the elements will be damaged.
Troubleshootings, contact seller support for further solution!
Not working | Blades get stuck in hard objects. --- Double click the button to restart, press the lid of the drinking spout and hold blender upside down for 2-3 seconds, then turn it back and shake it gently. |
The bottle and base is not tightened. --- Turn the bottle to the left and spin it into the base until the light flashes. | |
The fruit or ice cubes content of the added stuff is over 80%. --- Remove some of fruit or ice cubes, then use it normally. | |
Low power --- Click the button Once to check power status. When the power is less than 25%, please charge it. |
Not charged over a month. --- The battery is damaged. | |
If all the above 5 methods do not work, it may be that the blender has been running a long time, so please use it after a while. | |
Leakage | Added stuff exceed the MAX line. --- Take out some stuff until below the MAX line, then use it normally. |
The lid is screwed too tightly causing the inner silicone ring to roll up. --- Unscrew the lid, re-tighten the lid and do not tighten it too much. |